The 3.5in SAS drive is still the most economical way to put dependable capacity behind a hardware RAID controller. These large form factor disks fill the LFF bays of HPE ProLiant and Dell PowerEdge servers and the drive shelves of arrays such as HPE 3PAR, HPE Nimble, Dell EqualLogic and EMC. The main families here are 7.2K nearline drives, designed for capacity and long duty cycles rather than random IOPS. The notes below cover matching a replacement to the drives already in your system, reading the part numbers, and where these disks earn their place.
At a glance
Reading the part numbers
Enterprise drives are built by a handful of manufacturers and then relabelled by server and storage vendors, usually with their own firmware. The same mechanism can therefore turn up under several numbers. The Seagate Exos 7E8 2TB (ST2000NM0045) is sold under its own model number, as the HPE Nimble drive Q8D74A and as the Dell EMC Exos 7E8 (7RCGV). The Constellation ES.3 2TB NM0023 appears both as an HPE 3PAR spare (743403-001) and as Dell 1P7DP, and the Ultrastar 7K6000 4TB comes as the generic HGST HUS726040AL5210 or the EMC-labelled 118000194.
The platters and electronics are the same. What differs is the firmware, the label and what the host will accept. Servers tend to be tolerant; storage arrays usually are not. If you are working from a failed drive, search for whatever is printed on its label: a manufacturer model such as ST3000NM0043 or HUS723020ALS640, a part number such as 1V4204-075 or 9ZM273-035, or a vendor spare number such as C8R72A, P12341-003, 39R7340, 39M4530, MK1001TRKB, N3-2S10-600 or V3-VS15-600. Our product titles carry both the OEM and manufacturer numbers where we have them, so either is worth searching on.
Typical deployments
Replacing a drive in a ProLiant or PowerEdge array
Match interface, capacity and spindle speed to the surviving members. A larger drive will normally be accepted, but the controller only uses as much of it as the smallest disk in the set. For HPE ProLiant Gen8 to Gen10 LFF bays, an HPE-labelled drive such as the Enterprise Capacity 3.5 v4 4TB (765863-001) keeps reporting consistent; iLO and iDRAC can flag non-native drives or show less health detail for them. If you are unsure how your controller treats mixed drives, our guide to understanding RAID controllers is a useful starting point.
Backup repositories and file servers
Cost per terabyte and capacity per bay matter far more than seek time here. Backup software writes large sequential blocks, which nearline 7.2K drives handle comfortably. A 12-bay LFF chassis in RAID 6 gives you plenty of usable space with two-drive fault tolerance, and at multi-terabyte capacities that second parity disk earns its keep because rebuilds run for hours.
Storage array shelves
HPE 3PAR, Nimble, Dell EqualLogic and EMC arrays generally check drive firmware and may reject a disk that doesn't carry their own. Buy the array's part number, such as 743403-001 or 695507-002 for 3PAR or Q8D74A for Nimble, and match it to the drive you are replacing or to the array's supported list. For EqualLogic 3.5in SAS hard drives, use Dell-labelled parts that your array model lists as supported.
ZFS, Ceph and Storage Spaces Direct
Set the controller to HBA or IT mode so the operating system sees each disk directly. OEM labels matter less once the OS owns the drives, which makes generic Seagate and HGST mechanisms a sensible choice. Prioritise consistency: the same model, capacity and sector format across a vdev or pool, and dual-ported SAS if you are building a multipath JBOD.
Virtualisation capacity tiers
Be realistic about random I/O. A 7.2K spindle delivers a small fraction of what flash can, so a datastore of nearline disks suits file shares, templates, ISO libraries and backup copies rather than busy VMs or database logs. Use 3.5in SAS for the capacity tier and keep latency-sensitive workloads on SSD.
CCTV and cold archive
Surveillance recorders and archive stores write continuously and read rarely, so capacity per bay decides how much hardware you need. A high-capacity drive such as the Toshiba 12TB (KFJ7G) cuts the number of enclosures and spindles to power. Fewer, larger disks also mean longer rebuilds, so plan your parity level before you fill the chassis.
Why buy from Compuwyze
- Every drive comes with a 12-month return-to-base warranty; full terms are on our warranty information page.
- We aim to ship orders for simple items such as hard drives the same day when placed before 2pm.
- UK delivery is normally the next working day once your order has shipped.
- Free UK delivery on orders over £50, with bulk drive orders sent boxed or on pallets via Royal Mail, FedEx, DHL or FDC.
- International delivery with FedEx economy or priority services, usually within 2 to 5 days.
- Returns accepted within 30 days, with return shipping paid by the customer.
Frequently asked questions
What does SAS mean, and is it better than SATA?
SAS stands for Serial Attached SCSI. Compared with SATA it offers dual ports for redundant paths, full-duplex links and the SCSI command set, which gives controllers better queueing and error reporting. That makes it the default in servers and arrays. SATA is cheaper and fine for many single-host jobs, but it can't be used in dual-path enclosures. Our SAS vs SATA vs NVMe comparison sets out the trade-offs in more detail.
Why are refurbished 3.5in SAS drives so inexpensive?
Data centres and enterprises replace storage on fixed refresh cycles, often while the drives still have plenty of working life, and much of that hardware returns to the market in volume. As buyers move to flash and higher capacities, earlier 2TB to 4TB nearline drives become very good value for backup, archive and spares. Price is driven mainly by capacity, interface generation and whether the drive carries an OEM or array label.
Will an HPE-labelled drive work in a Dell server, or the other way round?
The mechanism is standard SAS, so most SAS controllers will see it. The catches are the carrier, which is vendor-specific, and the management layer: iLO and iDRAC may flag a non-native drive or report less health information for it. For a clean result, buy the label that matches your server. Storage arrays are stricter, so always use the array's own part number there.
Can I run a SAS3 12Gb/s drive on a SAS2 controller?
Yes. SAS is backwards compatible, and a 12Gb/s drive will negotiate down to 6Gb/s on a SAS2 controller or backplane. For a single 7.2K spinning disk, the link speed is rarely the bottleneck, because the drive's sustained throughput sits well below what a 6Gb/s link carries.
Is RAID 5 sensible with multi-terabyte nearline drives?
It is risky. Rebuilding a 4TB or 12TB disk takes many hours, and the array has no redundancy until it finishes, so a second failure or an unreadable sector during the rebuild can cost you the volume. RAID 6 or RAID 10 is the safer choice at these capacities, and keeping a matching spare on the shelf shortens your exposure when a drive does fail.